Check Point Software Technologies Smart-1 150 Service Manual download pdf (Page 15)

Attaching the Appliance Rails to the Appliance

Rack Mounting Smart-1 50/150 Page 15

2. Press plastic release catch in the direction of the arrow to disconnect the appliance rail from the

mounting bracket.

Attaching the Appliance Rails to the

Appliance

Attach the Appliance Rails to the Appliance. Use the same appliance rails for Smart-1 50 and for Smart-1

150.

You don't need to do this in the server room.

1. Identify the front of an appliance rail. One end of the rail is marked with FRONT.

2. Position the appliance rail on the side of the appliance:

a) Line up the front end of the rail with the front panel of the appliance,

b) Slide the appliance rail backwards until the correct holes in the appliance rail line up with the holes in

the side of the appliance:

 On the Smart-1 50, line up the four holes marked 50 with the holes in the appliance.

 On the Smart-1 150, line up the three holes marked 150 with the holes in the appliance.

3. Attach the appliance rail to the side of the Smart-1 appliance.

 For Smart-1 50 use four M3*6 screws

 For Smart-1 150 use three #6-32*6 screws

4. Repeat for the other side of the appliance.

Attaching the Appliance Handles or Bracket

Ears (Optional)

The appliance ear bracket (for Smart-1 50) and the appliance handles (for Smart-1 150) are optional. Use

them as a

 Handle, to make it easier to grab the front of appliance and slide it in and out. The Smart-1 150 is very

heavy. You can use the handles to help move and lift the appliance.

 Buffer that prevents to appliance jamming in the rack in the closed position.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 44 45

No comments

Check Point Software Technologies Smart-1 150 Service Manual Page 15