Check Point Software Technologies Smart-1 150 Service Manual download pdf (Page 20)

Using the First Time Configuration Wizard

Configuring Smart-1 Page 20

The management interface is marked Mgmt. This interface is preconfigured with the IP address

192.168.1.1.

2. Connect to the management interface by connecting from a computer on the same network subnet as

the management interface (for example, with IP address 192.168.1.x and netmask 255.255.255.0). This

can be changed later through the management interface.

3. To access the administration interface, initiate a connection from a browser to the default administration

IP address: https://192.168.1.1:4434.

Note - Pop-ups must always be allowed on

https://<appliance_ip_address>.

The login page appears.

4. Log in with the default system administrator login name/password: admin/admin, and click Login.

5. The First-Time Configuration Wizard runs. The Wizard presents a number of windows, in which you

are prompted to configure Smart-1.

Note - The features configured in the wizard are accessible after

completing the wizard via the WebUI menu. The WebUI menu can be

accessed by navigating to https://<appliance_ip_address>:4434.

Welcome

The Welcome page summarizes the steps of the First Time Configuration Wizard.

Appliance Date and Time Setup

Configure date and time in the Date and Time Setup page. Click Apply.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

No comments

Check Point Software Technologies Smart-1 150 Service Manual Page 20